實例講解RIP的明文驗證
作者：佚名
明文認證的匹配原則：發送方發送最小KEY ID的密鑰；不攜帶K ID號碼；接受方會和所有的KEY chain中的密鑰匹配，如果匹配成功，則通過。下面讓我們通過實例來看一下明文驗證步驟。
明文驗證步驟如下：
拓撲如圖：
1、明文認證時，被認證方發送key chian時，發送最低ID值的key，并且不攜帶ID；認證方接收到key后，和自己key chain的全部key進行比較，只要有一個key匹配就通過對被認證方的認證。
2、驗證
R1上配置為：
- key chain rip-key
- key 1
- key-string ccxx02
- !
- interface FastEthernet0/0
- ip address 192.168.12.1 255.255.255.0
- ip rip authentication key-chain rip-key
R2上配置為：
- key chain rip-key
- key 1
- key-string ccxx01
- key 2
- key-string ccxx02
- !
- interface FastEthernet0/0
- ip address 192.168.12.2 255.255.255.0
- ip rip authentication key-chain rip-key
3、路由器的路由表結果
- R1#show ip route
- Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
- D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
- N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
- E1 - OSPF external type 1, E2 - OSPF external type 2
- i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
- ia - IS-IS inter area, * - candidate default, U - per-user static route
- o - ODR, P - periodic downloaded static route
- Gateway of last resort is not set
- C 192.168.12.0/24 is directly connected, FastEthernet0/0
- C 192.168.1.0/24 is directly connected, Loopback0
- R2#show ip route
- Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
- D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
- N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
- E1 - OSPF external type 1, E2 - OSPF external type 2
- i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
- ia - IS-IS inter area, * - candidate default, U - per-user static route
- o - ODR, P - periodic downloaded static route
- Gateway of last resort is not set
- C 192.168.12.0/24 is directly connected, FastEthernet0/0
- R 192.168.1.0/24 [120/1] via 192.168.12.1, 00:00:15, FastEthernet0/0
- C 192.168.2.0/24 is directly connected, Loopback0
明文驗證的過程就為大家介紹完了，希望大家已經掌握。
【編輯推薦】
責任編輯：佚名
來源：
Cisco技術
