H3CIE考點：PIM SSM典型配置實驗舉例
4配置舉例
4.1組網需求
SwitchA、SwitchB和SwitchC組成一個PIM-SM的組播網絡，其中SwitchA連接組播源，SwitchB和SwitchC連接不同的接收者，接收者指定源加入。如圖1所示：
設備
接口
IP地址
設備
接口
IP地址
SwitchA
Vlan-int100
10.10.1.1/24
SwitchC
Vlan-int102
10.102.1.1/24
Vlan-int12
10.12.1.1/24
Vlan-int23
10.23.1.3/24
Vlan-int13
10.13.1.1/24
Vlan-int13
10.13.1.3/24
SwitchB
Vlan-int101
10.101.1.1/24
Vlan-int12
10.12.1.2/24
Vlan-int23
10.23.1.2/24
圖1PIMSSM特性典型配置組網圖
4.2配置思路
lSwitchA、SwitchB和SwitchC上分別配置單播路由協議，使各設備和組播源、接收者之間路由可達；
lSwitchA、SwitchB和SwitchC上分別使能組播路由協議，并配置各接口的PIM-SM協議，連接接收者的接口配置IGMPv3協議；
l配置SSM組地址范圍。
4.3使用版本
本舉例是在S12500-CMW520-B1131版本上進行配置和驗證的。
4.4配置步驟
&說明：
本文的組網環境可能與您的實際環境存在差異。為了保證配置效果，請確認設備上現有配置和以下配置不沖突。
4.4.1設備A的配置
1.配置步驟
(1)全局啟動組播路由
[SwitchA]multicastrouting-enable
(2)配置各接口及接口地址，并使能PIMSM
#配置連接組播源的接口及接口地址，使能PIMSM
[SwitchA]vlan100
[SwitchA-vlan100]portGigabitEthernet3/0/1
[SwitchA-vlan100]interfacevlan100
[SwitchA-Vlan-interface100]ipaddress10.10.1.124
[SwitchA-Vlan-interface100]pimsm
#配置連接SwitchB的接口及接口地址，使能PIMSM
[SwitchA]vlan12
[SwitchA-vlan12]portGigabitEthernet3/0/2
[SwitchA-vlan12]interfacevlan12
[SwitchA-Vlan-interface12]ipaddress10.12.1.124
[SwitchA-Vlan-interface12]pimsm
#配置連接SwitchC的接口及接口地址，使能PIMSM
[SwitchA]vlan13
[SwitchA-vlan13]portGigabitEthernet3/0/3
[SwitchA-vlan13]interfacevlan13
[SwitchA-Vlan-interface13]ipaddress10.13.1.124
[SwitchA-Vlan-interface13]pimsm
(3)配置SSM組地址范圍
[SwitchA]aclnumber2000
[SwitchA-acl-basic-2000]rulepermitsource225.0.0.00.255.255.255
[SwitchA-acl-basic-2000]pim
[SwitchA-pim]ssm-policy2000
(4)發布PIM接口單播路由
[SwitchA]ospf1
[SwitchA-ospf-1]import-routedirect
[SwitchA-ospf-1]area0.0.0.0
[SwitchA-ospf-1-area-0.0.0.0]network10.0.0.00.255.255.255
2.配置文件
#
multicastrouting-enable
#
aclnumber2000
rulepermitsource225.0.0.00.255.255.255
#
interfaceVlan-interface12
ipaddress10.12.1.1255.255.255.0
pimsm
#
interfaceVlan-interface13
ipaddress10.13.1.1255.255.255.0
pimsm
#
interfaceVlan-interface100
ipaddress10.10.1.1255.255.255.0
pimsm
#
ospf1
import-routedirect
area0.0.0.0
network10.0.0.00.255.255.255
#
pim
ssm-policy2000
#
4.4.2設備B的配置
1.配置步驟
(1)全局啟動組播路由
[SwtichB]multicastrouting-enable
(2)配置各接口及接口地址，并使能PIMSM
#配置連接SwtichA的接口及接口地址，使能PIMSM
[SwitchB]vlan12
[SwitchB-vlan12]portGigabitEthernet3/0/2
[SwitchB-vlan12]interfacevlan12
[SwitchB-Vlan-interface12]ipaddress10.12.1.224
[SwitchB-Vlan-interface12]pimsm
#配置連接SwtichC的接口及接口地址，使能PIMSM
[SwitchB]vlan23
[SwitchB-vlan23]portGigabitEthernet3/0/3
[SwitchB-vlan23]interfacevlan23
[SwitchB-Vlan-interface23]ipaddress10.23.1.224
[SwitchB-Vlan-interface23]pimsm
#配置連接HostA的接口及接口地址，使能PIMSM和IGMPv3
[SwitchB]vlan101
[SwitchB-vlan101]portGigabitEthernet3/0/1
[SwitchB-vlan101]interfacevlan101
[SwitchB-Vlan-interface101]ipaddress10.101.1.124
[SwitchB-Vlan-interface101]pimsm
[SwitchB-Vlan-interface101]igmpenable
[SwitchB-Vlan-interface101]igmpversion3
(3)配置SSM組地址范圍
[SwitchB]aclnumber2000
[SwitchB-acl-basic-2000]rulepermitsource225.0.0.00.255.255.255
[SwitchB-acl-basic-2000]pim
[SwitchB-pim]ssm-policy2000
(4)發布PIM接口單播路由
[SwitchB]ospf1
[SwitchB-ospf-1]import-routedirect
[SwitchB-ospf-1]area0.0.0.0
[SwitchB-ospf-1-area-0.0.0.0]network10.0.0.00.255.255.255
2.配置文件
#
multicastrouting-enable
#
aclnumber2000
rulepermitsource225.0.0.00.255.255.255
#
interfaceVlan-interface12
ipaddress10.12.1.2255.255.255.0
pimsm
#
interfaceVlan-interface23
ipaddress10.23.1.2255.255.255.0
pimsm
#
interfaceVlan-interface101
ipaddress10.101.1.1255.255.255.0
igmpenable
igmpversion3
pimsm
#
ospf1
import-routedirect
area0.0.0.0
network10.0.0.00.255.255.255
#
pim
ssm-policy2000
#
4.4.3設備C的配置
1.配置步驟
(1)全局啟動組播路由
[SwtichC]multicastrouting-enable
(2)配置各接口及接口地址，并使能PIMSM
#配置連接SwtichA的接口及接口地址，使能PIMSM
[SwitchC]vlan13
[SwitchC-vlan13]portGigabitEthernet3/0/3
[SwitchC-vlan13]interfacevlan13
[SwitchC-Vlan-interface13]ipaddress10.13.1.324
[SwitchC-Vlan-interface13]pimsm
#配置連接SwtichB的接口及接口地址，使能PIMSM
[SwitchC]vlan23
[SwitchC-vlan23]portGigabitEthernet3/0/2
[SwitchC-vlan23]interfacevlan23
[SwitchC-Vlan-interface23]ipaddress10.23.1.324
[SwitchC-Vlan-interface23]pimsm
#配置連接HostB的接口及接口地址，使能PIMSM和IGMPv3協議
[SwitchC]vlan102
[SwitchC-vlan102]portGigabitEthernet3/0/1
[SwitchC-vlan102]interfacevlan102
[SwitchC-Vlan-interface102]ipaddress10.102.1.124
[SwitchC-Vlan-interface102]pimsm
[SwitchC-Vlan-interface102]igmpenable
[SwitchC-Vlan-interface102]igmpversion3
(3)配置SSM組地址范圍
[SwitchC]aclnumber2000
[SwitchC-acl-basic-2000]rulepermitsource225.0.0.00.255.255.255
[SwitchC-acl-basic-2000]pim
[SwitchC-pim]ssm-policy2000
(4)發布PIM接口單播路由
[SwitchC]ospf1
[SwitchC-ospf-1]import-routedirect
[SwitchC-ospf-1]area0.0.0.0
[SwitchC-ospf-1-area-0.0.0.0]network10.0.0.00.255.255.255
2.配置文件
#
multicastrouting-enable
#
aclnumber2000
rulepermitsource225.0.0.00.255.255.255
#
interfaceVlan-interface13
ipaddress10.13.1.3255.255.255.0
pimsm
#
interfaceVlan-interface23
ipaddress10.23.1.3255.255.255.0
pimsm
#
interfaceVlan-interface102
ipaddress10.102.1.1255.255.255.0
igmpenable
igmpversion3
pimsm
#
ospf1
import-routedirect
area0.0.0.0
network10.0.0.00.255.255.255
#
pim
ssm-policy2000
#
4.5驗證結果
按照如上配置，SwitchA、SwitchB、SwitchC兩兩之間建立PIM鄰居關系，HostA進行源為10.10.1.2組為225.1.1.1的IGMPv3加入后能生成SG的PIMRouting表項。
可以通過以下方式驗證上述配置：
(1)SwitchB上與其他設備建立PIM鄰居關系
[SwtichB]displaypimneighbor
VPN-Instance:publicnet
TotalNumberofNeighbors=2
NeighborInterfaceUptimeExpiresDr-Priority
10.12.1.1Vlan1200:00:0500:01:401
10.13.1.3Vlan2300:00:2000:01:411
(2)假如HostA需要接收組播源組（10.10.1.2,225.1.1.1）的信息，通過使用displaypimrouting-table命令可以查看到PIM路由表信息。
#查看SwitchB上的PIM路由表信息
[SwitchB]displaypimrouting-table
VPN-Instance:publicnet
Total1(S,G)entry
(10.10.1.2,225.1.1.1)
Protocol:pim-ssm,Flag:
UpTime:00:14:24
Upstreaminterface:Vlan-interface12
Upstreamneighbor:10.12.1.1
RPFprimeneighbor:10.12.1.1
Downstreaminterface(s)information:
Totalnumberofdownstreams:1
1:Vlan-interface101
Protocol:igmp,UpTime:00:14:24,Expires:-
#查看SwitchA上的PIM路由表信息
[SwitchA]displaypimrouting-table
VPN-Instance:publicnet
Total1(S,G)entry
(10.10.1.2,225.1.1.1)
Protocol:pim-ssm,Flag:LOC
UpTime:00:00:22
Upstreaminterface:Vlan-interface100
Upstreamneighbor:NULL
RPFprimeneighbor:NULL
Downstreaminterface(s)information:
Totalnumberofdownstreams:1
1:Vlan-interface12
【編輯推薦】
